Home » MTP 5601 Clamp-On Ground Resistance Meter

MTP 5601 Clamp-On Ground Resistance Meter

MTP 5601 Clamp-On Ground Resistance Meter
Part Number:
MTP 5601
In Stock?
Yes! Available up to 1 units

Quantity

Price:
$1237.14 USD (change)

 

Terms & Conditions
Shipping Information:

Ships in 1 - 3 Days
Arrives:
Feb 13-
Feb 19
Max of 1 units
$50.00
Fast: Ships tomorrow*
Arrives:
Feb 10
Max of 1 units
$69.00
Fastest: Overnight
Arrives:
Feb 09
Max of 1 units
$99.00

The Clamp-on Ground Resistance Tester 5601 measures ground rod and small grid resistance through any season, without the use of auxiliary ground rods.

Clamp-on Ground Resistance Testers are used in multi-grounded systems without disconnecting the ground under test. The Model 5601 simply clamps around the ground conductor or rod and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.

  • Non-Contact Ground Resistance Measurement
  • No Auxiliary Electrode Needed
  • 0.025 - 1500
  • Ground Wire O 23mm/0.9inch
  • Leakage Current (0.200mA - 10.00mA)
  • Hi-Lo Alarm (Go - No Go)
  • 116 Test memory locations
  • Programmable data logging
The Good:


The Bad:


The Bottom Line:

Full Review

Applications:
  • Measure electrical ground rod and grid resistance
  • Use on multi-grounded systems without disconnecting the ground rod under test
  • Measure resistance and continuity of grounding loops around pads and buildings
  • Measure leakage current flowing to ground or circulating in ground systems
  • Conduct field surveys and retrieve and analyze readings at a later time
  • Use on cell towers and telecommunication sites
  • Use on pools, spas and other consumer installations
  • Non-Contact Ground Resistance Measurement
Features:
  • No Auxiliary Electrode Needed
  • 0.025 - 1500 Ohms measurement range
  • Ground Wire O 23mm/0.9 inch¯
  • Leakage Current (0.200mA - 10.00mA)
  • Hi-Lo Alarm (Go - No Go)
  • Memory of 116 records
  • Programmable Data Logging
  • Auto Detect of Jaw Open and Ground Noise
  • Compliant with Safety Standard EN61010-2
  • CAT II 600V , CAT III 300V
General Specifications:

Jaw Opening: 23mm (0.9 inch¯)
Power Source: 9V Battery
Power Consumption: 40mA
Operating Temperature: 0°C to 40°C
Operating Humidity: Less than 80% RH
Dimensions: 258mm(L) x 100mm(W) x 47mm(H)
10.2¯(L) x 4¯(W) x 1.9¯(H)
Weight: 640g (1.4lbs)

Electrical Specifications:

Ground Resistance (Autorange):
Range
  • 0.025 ~ 0.250 Ohm
  • 0.250 ~ 9.999 Ohm
  • 10.00 ~ 99.99 Ohm
  • 100.0 ~ 199.9 Ohm
  • 200.0 ~ 400.0 Ohm
  • 400.0 ~ 600.0 Ohm
  • 600.0 ~ 1500.0 Ohm

Resolution
  • 0.002 Ohm
  • 0.02 Ohm
  • 0.04 Ohm
  • 0.4 Ohm
  • 2 Ohm
  • 5 Ohm
  • 20 Ohm

Accuracy of reading1
  • 1.5% 0.05 Ohm
  • 1.5% 0.1 Ohm
  • 2.0% 0.3 Ohm
  • 3.0% 1.0 Ohm
  • 5.0%5 Ohm
  • 10% 10 Ohm
  • 20% (Approx.)

1 Loop resistance noninductive, external field < 50A/m, external electrical field < 1V/m, conductor centered.

2 Resistance Measurement Frequency: 1.667KHz
 Continuity
Beep if resistance < 40.00Ohm (Approximately)

Ground / Leakage Current (Autorange, 50/60Hz, True RMS, Crest Factor < 3.0)

Range
  • 0.200 ~ 1.000mA
  • 1.00 ~ 10.00mA
  • 10.0 ~ 100.0mA
  • 100 ~ 1000mA

Resolution
  • 0.001mA
  • 0.01mA
  • 0.1mA
  • 1mA

Ground / Leakage Current (50/60Hz, True RMS, Crest Factor < 3.0)
Range
  • 0.20 ~ 10.00A

Resolution
  • 0.01A

Accuracy of reading1
  • 2.0% ±0.03A

Product brochures

MTP 5601 brochure
No user reviews available.

Have a Question?

Do you have a question for us? Can't find what you're looking for? We're glad to help you. Fill out the simple form below and we'll get back to you as soon as possible.

Name
Email
Phone
Message
In order to prevent spam through the form, please enter the passcode word displayed below. If you cannot read the word clearly, you can change the passcode image.

Enter Passcode: