Home » Analog Fall of Potential » Analog Fall-of-Potential » AEMC F1N Clamp-On Meter
AEMC F1N Clamp-On Meter
Sorry, this product is discontinued and is no longer available for purchase. Please call 1-877-766-5412 to find a suitable replacement.
The Clamp-On Meter Model F1N is designed to take measurements on low
and medium power electrical installations in conductors carrying a peak
current of no more than 1000A. The True RMS current measurement range
extends from 300mA to 400A. The meter measures true TRMS current,
frequency (Hz) and holds the last measurement on the digital display
while the bargraph continues to display the instantaneous. The Model
F1N has automatic or manual selection of the display range, a
40-segment analog bargraph, battery test on the bargraph during
operation of the instrument, battery level indicator and auto power off
after 10 minutes of non-use.
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
Features
True RMS Current measurements to 700A Frequency measurements to 10kHz Digital display with fast analog bargraph to show surge currents Display Current and Frequency simultaneously Auto and manual ranging modes Tapered jaws handle two 500MCM cables or 1.5" (38mm) cable Audible beep confirms key functions and new Min/Max values Battery life indication displayed at power-up Sleep mode to conserve battery life EN 61010, 600V Cat. III Includes soft protective carrying holster
ApplicationsElectrical
testing of distorted currents found on uninterruptible power supplies
(UPS), speed controls, static power blocks, chopped power supplies,
controllers and motors
Applications
- Measurement Range: 0.3 to 400Arms (700A for sine wave)
- Resolution: 0.01A to 0.1A
- Accuracy: +/-2% of reading +/- 20cts Frequency
- Measurement Range: 0.5 to 10kHz
- Resolution: 0.1Hz
- Accuracy: +/- 0.2% of reading +/- 3cts
- 9V Alkaline Battery
No user reviews available.
